According to the cartridge box, the 60-gr. Once I started at the rear and then pressed the front of the magazine, it popped right in. I tried a few times at the range to simply insert the magazine straight into the well but it hung up for me. The magazine carries three rounds and I’ll mention this in passing because you’ll want to know: Press the rear of the magazine in first and then push up the front end. It’s user-adjustable but I didn’t tinker with it because out of the box it had a superior letoff. Savage incorporated its AccuTrigger which breaks crisp and clean. load using the Nosler Ballistic Tip Varmint bullet, which is a nasty surprise for prairie dogs. Barnes TSX (Triple-Shock) and the aforementioned 60-gr. Federal Fusion soft points, Federal Premiums using the 78-gr. My ammunition assortment also included a supply of 90-gr. bullets and another Gold Medal load from Federal Premium using an 80.5-gr. Recoil was easily manageable and after adjusting the scope, I managed some decent groups using the 90-gr. While waiting for a 3-18x50mm Meopta Optika6 scope to arrive, I slapped on a 3-9X Leupold for some preliminary range work. The Prairie Hunter comes from the factory with a one-piece 20 MOA rail installed. I prefer a three-position safety because it allows the safe ejection of an unfired round if the need arises. 308 Winchester, so shooting the Prairie Hunter was like using an old friend. It’s identical to the safety on my Savage Model 14/114 American Classic deer rifle chambered for. Savage uses a three-position thumb safety at the rear of the receiver. With an OAL of 42.25", the Prairie Hunter will easily tuck behind the seat of a truck or in an SUV. Just pull the recoil pad and remove the foam inner block, select which spacers you want and slide the selected comb back into place. The rifle also comes with four extra interchangeable combs ranging from low (straight) to high. Length of pull varies between 12.75" and 13.75" depending upon which of the various spacers are installed. Once I mounted a scope (three different ones were involved in this evaluation), I picked the highest replacement comb and went to work. This selection of interchangeable stock components is called the AccuFit system, and it definitely works. The Prairie Hunter truly is a modular rifle that can be tailored to an individual shooter. It’s textured at the grip and forend, and there are three QD studs, onto the most forward of which I mounted a Harris bipod for part of the field test. The receiver is also black matte-finished carbon steel and nestles into the grey synthetic stock nicely.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |